SDO Error Message: SDO-00000 to SDO-07511

SDO-00000 successful completion

Cause: An operation has completed normally, having met no exceptions.

Action: No user action required.

SDO-00002 too many errors in `%s' - aborting

Cause: The max errors allowed has been reached.

Action: Fix errors and retry or increase the max errors allowed.

SDO-00200 could not allocate memory for initialization of internal heap manager

Cause: Could not allocate the essential memory.

Action: Increase amount of memory available or wait until more memory becomes available.

SDO-00201 failed to initialize message handler

Cause: Possibly could not allocate the essential memory.

Action: Increase amount of memory available or wait until more memory becomes available.

SDO-00202 out of memory while performing essential allocations

Cause: Could not allocate the essential memory.

Action: Increase amount of memory available or wait until more memory becomes available.

SDO-00203 invalid maximum bind array size

Cause: The space allocated to do the necessary processing was not enough.

Action: Increase the value of the bind size.

SDO-00250 unable to open `%s' for processing

Cause: Could not open the named file for processing.

Action: Check the operating system message(s) accompanying this message.

SDO-00251 cannot close `%s'

Cause: Could not close the named file.

Action: Check the operating system message(s) accompanying this message.

SDO-00252 unable to read `%s'

Cause: Could not read the named file for processing.

Action: Check the operating system message(s) accompanying this message.

SDO-00253 unable to write to `%s'

Cause: Could not write to the named file.

Action: Check the operating system message(s) accompanying this message.

SDO-00254 unable to seek in `%s'

Cause: Could not seek the named file for processing.

Action: Check the operating system message(s) accompanying this message.

SDO-00255 unable to write to log file

Cause: Could not write to log file.

Action: Check the operating system message(s) accompanying this message.

SDO-00256 unable to delete `%s'

Cause: Could not delete the named file.

Action: Check the operating system message(s) accompanying this message.

SDO-00257 unable to rename `%s'

Cause: Could not rename the named file.

Action: Check the operating system message(s) accompanying this message.

SDO-00258 unable to open a temporary file for processing

Cause: Could not open the named file for processing.

Action: Check the operating system message(s) accompanying this message.

SDO-00259 cannot close a temporary file

Cause: Could not close the named file.

Action: Check the operating system message(s) accompanying this message.

SDO-00260 unable to read from a temporary file

Cause: Could not read the named file for processing.

Action: Check the operating system message(s) accompanying this message.

SDO-00261 unable to write to a temporary file

Cause: Could not write to the named file.

Action: Check the operating system message(s) accompanying this message.

SDO-00262 unable to seek in a temporary file

Cause: Could not seek the named file for processing.

Action: Check the operating system message(s) accompanying this message.

SDO-00263 unable to create a unique temporary file name

Cause: Could not create a unique file name.

Action: Check the operating system message(s) accompanying this message.

SDO-00264 unable to delete a temporary file

Cause: Could not delete a temporary file.

Action: Check the operating system message(s) accompanying this message.

SDO-00265 unable to rename a temporary file

Cause: Could not rename a temporary file.

Action: Check the operating system message(s) accompanying this message.

SDO-00267 failed to translate environment variable in path

Cause: The environment variable is invalid or not defined.

Action: Verify that the environment variable is correct.

SDO-01000 invalid keyword or value for argument number %s

Cause: Incorrect spelling of keyword, keyword is not valid, or incorrect type for argument's value.

Action: Check the command syntax and your spelling, then retry.

SDO-01001 mandatory keyword is missing

Cause: Keyword was left out on the command line.

Action: Place mandatory keyword on command line.

SDO-01002 argument for the keyword `%s' is invalid

Cause: Argument is either missing or out of bounds.

Action: Verify argument is correct for the specified keyword.

SDO-01003 `%s' is not a valid keyword or missing value for the keyword

Cause: Incorrect spelling of keyword, keyword is not valid, or value of the keyword is missing.

Action: Check the command syntax and your spelling, then retry.

SDO-01004 invalid combination on command line

Cause: A keyword was used that could not be combined with a previous keyword on the command line.

Action: Check the command line syntax.

SDO-01005 error detected on the command line

Cause: A command line parameter is improperly defined.

Action: Verify that all command line parameters are properly specified.

SDO-01006 a userid was not specified on the command line

Cause: A user ID was not specified on the command line.

Action: A user ID must be specified on the command line. (for example: USERID=sims/sims)

SDO-01007 failed to parse connect string

Cause: The connect string specified could not be properly parsed.

Action: Verify that the connect string is valid. If it is, document messages and contact Oracle Worldwide Support.

SDO-01008 a null userid was specified

Cause: The user specified a null user ID.

Action: A user ID must be entered.

SDO-01009 a null password was specified

Cause: The user specified a null password.

Action: A password must be entered.

SDO-01200 internal error: [%s]

Cause: An error occurred during an internal match manipulation.

Action: Document messages and contact Oracle Worldwide Support.

SDO-01201 internal error: [%s]

Cause: An error occurred during an internal substring manipulation.

Action: Document messages and contact Oracle Worldwide Support.

SDO-01202 internal error: [%s]

Cause: An error occurred during an internal increment manipulation.

Action: Document messages and contact Oracle Worldwide Support.

SDO-01203 internal error: [%s]

Cause: An error occurred during an internal set ID manipulation.

Action: Document messages and contact Oracle Worldwide Support.

SDO-01204 internal error: [%s]

Cause: An error occurred during an internal get ID manipulation.

Action: Document messages and contact Oracle Worldwide Support.

SDO-01500 invalid username/password; logon denied

Cause: An invalid user name or password was entered in an attempt to log on to Oracle.

Action: Enter a valid user name/password combination in the correct format.

SDO-01501 failed to log onto Oracle

Cause: Log onto Oracle failed.

Action: Verify that the Oracle connect string is valid.

SDO-01502 failed to connect as MDSYS

Cause: The connection to the Oracle MDSYS account failed.

Action: Verify that this account exists and was set up correctly.

SDO-01503 partition is locked

Cause: Partition is currently being used.

Action: Wait until the partition is free.

SDO-01507 partition is locked with an unknown status

Cause: Status of partition is not a known status.

Action: Verify that the Spatial Cartridge data dictionary is correct.

SDO-01508 inserted a partition record after someone else did

Cause: Multiple concurrent loads created same partition (only one wins).

Action: Re-run the load process.

SDO-01600 failed to create table

Cause: Check the Oracle messages accompanying this message.

Action: Verify that you are able to create a table.

SDO-01601 failed to create temporary table

Cause: Check the Oracle messages accompanying this message.

Action: Verify that you are able to create a table.

SDO-01602 failed to drop table

Cause: Check the Oracle messages accompanying this message.

Action: Verify that you are able to drop a table.

SDO-01603 failed to drop a temporary table

Cause: Check the Oracle messages accompanying this message.

Action: Verify that you are able to drop a table.

SDO-01604 failed to truncate table

Cause: Check the Oracle messages accompanying this message.

Action: Verify that you are able to truncate a table.

SDO-01605 failed to truncate temporary table

Cause: Check the Oracle messages accompanying this message.

Action: Verify that you are able to truncate a table.

SDO-01606 real table does not exist

Cause: An attempt was made to archive in an archive file and the truncated table does not exist.

Action: Document messages and contact Oracle Worldwide Support.

SDO-01607 HHCODE column has no dimensional information

Cause: The dimensional information for the HHCODE column was not found.

Action: Verify that the dimensional information is correct.

SDO-01608 HHCODE column is missing dimensional information in `%s'

Cause: No dimensional information was entered.

Action: Verify that the dimensional information is correct.

SDO-01609 spatial table name does not exist for specified owner

Cause: Either the spatial table name is misspelled or it does not exist.

Action: Verify that table exists and check spelling.

SDO-01610 null was passed in not null field `%s'

Cause: Null flag was set for a column that was set as a not null field.

Action: Set flag for not null setting.

SDO-01611 dimensional value for `%s' is out of bounds

Cause: The dimensional value is not in the range of the lower and upper bound of the dimension.

Action: Verify that 01901 failed to select information from table md$dim

Cause: Either table does not exist or is inconsistent.

Action: Verify the Spatial Cartridge data dictionary.

SDO-01902 failed to select information from table md$ptab

Cause: Either table does not exist or is inconsistent.

Action: Verify the Spatial Cartridge data dictionary.

SDO-01903 failed to select information from view mdv$tab

Cause: Either view does not exist or is inconsistent.

Action: Verify the Spatial Cartridge data dictionary.

SDO-01904 failed to select information from view mdv$col

Cause: Either view does not exist or is inconsistent.

Action: Verify the Spatial Cartridge data dictionary.

SDO-01905 failed to select information from view mdv$dim

Cause: Either view does not exist or is inconsistent.

Action: Verify the Spatial Cartridge data dictionary.

SDO-01906 failed to select information from view all_md_dimensions

Cause: Either view does not exist or is inconsistent.

Action: Verify the Spatial Cartridge data dictionary.

SDO-01907 failed to select information from view all_md_columns

Cause: Either view does not exist or is inconsistent.

Action: Verify the Spatial Cartridge data dictionary.

SDO-01908 failed to select information from view all_tab_columns

Cause: Either view does not exist or you do not have access.

Action: Verify that you have access to the view and it is working properly.

SDO-01909 failed to find dimension information from view all_md_dimensions

Cause: View may not exist.

Action: Verify that view exists and is working properly.

SDO-01910 failed to find column information from view all_md_columns

Cause: View may not exist.

Action: Verify that view exists and is working properly.

SDO-01911 failed to select information from table md$ler

Cause: Either view does not exist or is inconsistent.

Action: Verify the Spatial Cartridge data dictionary.

SDO-01912 failed to select information from table md$pts

Cause: Either view does not exist or is inconsistent.

Action: Verify the Spatial Cartridge data dictionary.

SDO-01913 failed to select information from table md$tab

Cause: Either view does not exist or is inconsistent.

Action: Verify the Spatial Cartridge data dictionary.

SDO-01914 failed to insert information from table md$exc

Cause: Either view does nTotal number of HHCODE columns in SLF file does not match total in spatial table. Either the spatial table definition was changed after the SLF file was created or the SLF file is being loaded into the wrong spatial table.

Action: Verify the SLF file is being loaded into the correct spatial table or regenerate the SLF file.

SDO-05002 SLF header: %s does not match spatial data dictionary: %s

Cause: Total number of dimensions for each HHCODE column in SLF file does not match total in spatial table. Either the spatial table definition was changed after the SLF file was created or the SLF file is being loaded into the wrong spatial table.

Action: Verify the SLF file is being loaded into the correct spatial table or regenerate the SLF file.

SDO-05003 SLF header: %s does not match spatial data dictionary: %s

Cause: Total number of non-HHCODE columns in SLF file does not match total in spatial table. Either the spatial table definition was changed after the SLF file was created or the SLF file is being loaded into the wrong spatial table.

Action: Verify the SLF file is being loaded into the correct spatial table or regenerate the SLF file.

SDO-05004 SLF header: %s does not match spatial data dictionary: %s

Cause: HHCODE column name in SLF file does not match name in spatial table. Either the spatial table definition was changed after the SLF file was created or the SLF file is being loaded into the wrong spatial table.

Action: Verify the SLF file is being loaded into the correct spatial table or regenerate the SLF file.

SDO-05005 SLF header: %s does not match spatial data dictionary: %s

Cause: Number of dimensions of HHCODE column in SLF file does not match number in spatial table. Either the spatial table definition was changed after the SLF file was created or the SLF file is being loaded into the wrong spatial table.

Action: Verify the SLF file is being loaded into the correct spatial table or regenerate the SLF file.

SDO-05006 SLF header: %s does not match spatial data dictionary: %s

Cause: Maximum level of dimensions of HHCODE column in SLF file does not match maximum level in spatial table. Either the spatial table definition was changed after the SLF file was created or the SLF file is being loaded into the wrong spatial table.

Action: Verify the SLF file is being loaded into the correct spatial table or regenerate the SLF file.

SDO-05007 SLF header: %s does not match spatial data dictionary: %s

Cause: Size of HHCODE column in SLF file does not match size in spatial table. Either the spatial table definition was changed after the SLF file was created or the SLF file is being loaded into the wrong spatial table.

Action: Verify the SLF file is being loaded into the correct spatial table or regenerate the SLF file.

SDO-05008 SLF header: %s does not match spatial data dictionary: %s

Cause: Null field of HHCODE column in SLF file does not match null field in spatial table. Either the spatial table definition was changed after the SLF file was created or the SLF file is being loaded into the wrong spatial table.

Action: Verify the SLF ed or the SLF file is being loaded into the wrong spatial table.

Action: Verify the SLF file is being loaded into the correct spatial table or regenerate the SLF file.

SDO-05013 SLF header: %s does not match spatial data dictionary: %s

Cause: Dimension upper bound of an HHCODE column in SLF file does not match upper bound in spatial table. Either the spatial table definition was changed after the SLF file was created or the SLF file is being loaded into the wrong spatial table.

Action: Verify the SLF file is being loaded into the correct spatial table or regenerate the SLF file.

SDO-05014 SLF header: %s does not match spatial data dictionary: %s

Cause: Column name in SLF file does not match name in spatial table. Either the spatial table definition was changed after the SLF file was created or the SLF file is being loaded into the wrong spatial table.

Action: Verify the SLF file is being loaded into the correct spatial table or regenerate the SLF file.

SDO-05015 SLF header: %s does not match spatial data dictionary: %s

Cause: Null field of column in SLF file does not match null field in spatial table. Either the spatial table definition was changed after the SLF file was created or the SLF file is being loaded into the wrong spatial table.

Action: Verify the SLF file is being loaded into the correct spatial table or regenerate the SLF file.

SDO-05016 SLF header: %s does not match spatial data dictionary: %s

Cause: Column type in SLF file does not match type in spatial table. Either the spatial table definition was changed after the SLF file was created or the SLF file is being loaded into the wrong spatial table.

Action: Verify the SLF file is being loaded into the correct spatial table or regenerate the SLF file.

SDO-05017 SLF header: %s does not match spatial data dictionary: %s

Cause: Precision field of column in SLF file does not match precision field in spatial table. Either the spatial table definition was changed after the SLF file was created or the SLF file is being loaded into the wrong spatial table.

Action: Verify the SLF file is being loaded into the correct spatial table or regenerate the SLF file.

SDO-05018 SLF header: %s does not match spatial data dictionary: %s

Cause: Scale field of column in SLF file does not match scale field in spatial table. Either the spatial table definition was changed after the SLF file was created or the SLF file is being loaded into the wrong spatial table.

Action: Verify the SLF file is being loaded into the correct spatial table or regenerate the SLF file.

SDO-05019 SLF header: %s does not match spatial data dictionary: %s

Cause: Size of column in SLF file does not match size in spatial table. Either the spatial table definition was changed after the SLF file was created or the SLF file is being loaded into the wrong spatial table.

Action: Verify the SLF file is being loaded into the correct spatial table or regenerate the SLF file.

SDO-05020 no data found in SLF file (just header information)

Cause: During the conversion process the writing SLF record process died.

Action: Re-create the SLF file verifying that the SLF data is written.

SDO-05200 line in `%s' was too complex to parse

Cause: Data in control file exceeded maximum field limits.

Action: Document messages and contact Oracle Worldwide Support.

SDO-05201 insufficient number of fields in `%s'

Cause: There were fewer than three fields in the control file.

Action: Check the control file for accuracy.

SDO-05202 did not find the expected line or keyword in `%s'

Cause: Expected keyword or line was not found.

Action: Verify that the specified keywords are in the correct order.

SDO-05203 an invalid number of partition key columns was specified in `%s'

Cause: More than one partition key was specified in the named control file.

Action: Verify only one HHCODE is specified as the partition key in the named control file.

SDO-05204 HHCODE column is missing a dimension sequence in `%s'

Cause: When entering the dimensional information into the named control file, a dimensional sequence was left out.

Action: Verify that the sequence values for the dimensions are correct.

SDO-05205 file type keyword not found in `%s'

Cause: The required file type keyword in named file is missing.

Action: Verify that the control file has the correct information.

SDO-05206 unexpected keyword or value found in `%s'

Cause: There was more than one field found in the control file.

Action: Check the control file for accuracy.

SDO-05207 `%s' is an invalid file type specified in control file

Cause: The file type was spelled incorrectly. The only valid file types are BINARY and ASCII.

Action: Verify that the file type specified in the control file is correct.

SDO-05208 format keyword not found in `%s'

Cause: The required format keyword in named file is missing.

Action: Verify that the control file has the correct information.

SDO-05209 unexpected keyword or value found in `%s'

Cause: There were more than two fields found in the control file.

Action: Check the control file for accuracy.

SDO-05210 `%s' is an invalid keyword specified in control file

Cause: The keyword FIXED was not found in control file.

Action: Verify that the keyword specified in the control file is correct.

SDO-05211 `%s' is an invalid record length specified for the data file

Cause: Record length specified is invalid for given data file.

Action: Verify that the record length specified is correct.

SDO-05212 `%s' is an invalid keyword specified in control file

Cause: The only valid keywords are DIMENSION and COLUMN.

Action: Verify that the file type specified in the control file is correct.

SDO-05213 `%s' is an invalid keyword specified in control file

Cause: The missing keyword POSITION was not found in the control file.

Action: Verify that the keyword specified in the control file is correct.

SDO-05214 invalid position value specified in `%s'

Cause: Field position was incorrectly specified.

Action: Verify that the field positions specified are correct.

SDO-05215 `%s' is an invalid data type specified in control file

Cause: Data type specified was spelled incorrectly. The only valid data types are INTEGER, SMALLINT, FLOAT, DOUBLE, BYTEINT, DATE, RAW, and CHAR.

Action: Verify that the data type specified is correct.

SDO-05216 specified position length is not compatible with `%s'

Cause: Field position value was incorrectly specified.

Action: Verify that the field positions specified are correct.

SDO-05217 `%s' is an invalid keyword specified in control file

Cause: The missing keyword NULLIF was not found in control file.

Action: Verify that the keyword specified in the control file is correct.

SDO-05218 `%s' is an invalid null indicator in control file

Cause: Null indicator was incorrectly specified.

Action: Verify that the null indicator is correct.

SDO-05219 no spatial information was found in `%s'

Cause: Spatial information was not found in the named file.

Action: Enter the dimension information into the named file.

SDO-05220 no dimensional or column information was found in `%s'

Cause: No information was found in the named file.

Action: Enter the column and dimension information into the named file.

SDO-05221 `%s' is not the expected value in the data file

Cause: Expected value was not found.

Action: Verify that the specified file is correct.

SDO-05222 data conversion with column `%s' failed

Cause: Either bad data was passed or incorrect format string was used.

Action: Verify that the data and format string are correct.

SDO-05500 user aborted SD*Loader

Cause: User aborted program.

Action: No action required.

SDO-05501 SQL*Loader failed to load all records to the partition

Cause: Some records were bad or rejected.

Action: Check the log file and correct any errors indicated.

SDO-05502 SQL*Loader failed

Cause: The SQL*Loader process died.

Action: Check log file and correct any errors indicated.

SDO-07510 bad boolean value

Cause: A bad Boolean value was specified.

Action: Verify that the value is TRUE or FALSE.

SDO-07511 failed to read user input from terminal

Cause: An error was encountered while attempting to prompt the user for input from the terminal.

Action: This is an internal error. Document messages and contact Oracle Worldwide Support.

---

---

Prev Top Next

Copyright © 1997 Oracle Corporation. All Rights Reserved.

Library Product Contents Index