Release 8.0.4
A58312-01
 Library |
 Product |
 Contents |
 Index |
| Oracle8 Error Messages Release 8.0.4 A58312-01 |
|
Cause: Disk reads may not complete in time when your volume is overloaded or a stream is in ff/rw mode some disk is dead.
Action: Verify all disks in your volume are healthy and make sure you have configured a volume that is big enough to support all your concurrent streams.
Cause: The stream service asked the pump to play from past the end of a file.
Action: Verify the file being played and its tag file are valid and up to date.
Cause: The pump was asked to write to a downstream device that was not previously opened. The device can either be opened at initialization time via command line arguments or at run time via an RPC call from the upstream manager.
Action: Verify that either your DSM specifier command line argument is correct or that that upstream manager has been configured with network provisioning turned on.
Cause: The hostname given in the DSM specifier on the vpump command line is unknown by the system.
Action: Check that the hostname is listed in /etc/hosts or use the IP address directly in the DSM specifier.
Cause: An error occurred in the operating system UDP/IP library.
Action: Verify UDP is alive and working on your server.
Cause: An error occurred in the operating system UDP/IP library.
Action: Verify UDP is alive and working on your server.
Cause: The video pump can not open the downstream device.
Action: Verify the down stream device is functioning properly.
Cause: The video pump can not open the downstream device.
Action: Verify the down stream device is functioning properly.
Cause: The video pump can not send data to the downstream device.
Action: Verify the down stream device is functioning properly.
Cause: The video pump can not send data to the downstream device.
Action: Verify the down stream device is functioning properly.
Cause: Media net was unable to create an RPC service.
Action: This is an internal error. Contact customer support.
Cause: Media net was unable to register an RPC service.
Action: Verify media net and, in particular, the name service are ok.
Cause: MDS was unable to create the raw dump file.
Action: Verify the raw dump file name specified on the command line is a valid MDS file name. Make sure MDS is up and running.
Cause: Communication with the connection service failed.
Action: Verify the connection service is up.
Cause: The stream service issued an unrecognized command to the pump.
Action: This is an internal error. Contact customer support.
Cause: The lookup operation on the connection service failed.
Action: Verify the connection service is up.
Cause: The video pump can not connect to the downstream device.
Action: Verify the down stream device is functioning properly.
Cause: The video pump can not close the downstream device.
Action: Verify the down stream device is functioning properly.
Cause: A file could not be opened in a reasonable amount of time.
Action: Make sure MDS is up and functioning properly.
Cause: The initial reads of a file to prime the internal cache did not complete in a reasonable amount of time.
Action: Make sure MDS is up and functioning properly.
Cause: The video pump can not open the downstream device.
Action: Verify the down stream device is functioning properly.
Cause: The video pump can not initialize MDS.
Action: Make sure MDS is up and functioning properly.
Cause: A spurious stop RPC was received.
Action: This is somewhat unusual but not harmful, no action needed.
Cause: A spurious initialize RPC was received.
Action: This is somewhat unusual but not harmful, no action needed.
Cause: Media net was unable process the RPC call.
Action: This is an internal error. Contact customer support.
Cause: The video pump could not make sense out of data in the file.
Action: Verify the file in question is valid.
Cause: During ff/rw, invalid file data was seen.
Action: Verify that the playing file is valid.
Cause: During ff/rw, invalid file data was seen.
Action: Verify that the playing file is valid.
Cause: During ff/rw, invalid file data was seen.
Action: Verify that the playing file is valid.
Cause: The stream service is issuing invalid RPC calls to the video pump.
Action: This is an internal error. Contact customer support.
Cause: The video pump was not started with a valid buffer size argument.
Action: Examine the video pump's usage statement and add the correct argument to the command line.
Cause: The video pump was not started with a valid buffer size argument.
Action: The output buffer size must be a multiple of the format packet size.
Cause: The video pump could not make sense out of data in the file.
Action: Verify the file in question is valid.
Cause: The video pump ran out of communication buffer space.
Action: Verify you have enough memory to run all your streams.
