Release 8.0.4
A58312-01
 Library |
 Product |
 Contents |
 Index |
| Oracle8 Error Messages Release 8.0.4 A58312-01 |
|
Cause: There are several causes: (1) the LOB locator was never initialized; (2) the locator is for a BFILE and the routine expects a BLOB/CLOB/NCLOB locator; (3) the locator is for a BLOB/CLOB/NCLOB and the routine expects a BFILE locator; (4) trying to update the LOB in a trigger body -- LOBs in trigger bodies are read only.
Action: For (1), initialize the LOB locator by selecting into the locator variable or by setting the LOB locator to empty. For (2) and (3), pass the correct type of locator into the routine. For (4), remove the trigger body code that updates the LOB value.
Cause: There are several causes: (1) the locator was never enabled for buffering (2) it is not an updated locator but is being used for a write/flush operation.
Action: For (1) enable the locator for buffering; (2) ensure that only an updated locator is used for a LOB update operation
Cause: LOB buffering is enabled and an attempt was made to modify the same LOB using two different LOB locators.
Action: When using LOB buffering, modify the LOB through one LOB locator only.
Cause: LOB buffering is enabled for this LOB and there are buffers for this LOB in the buffer pool. Thus, updating the LOB through means other than the LOB buffers is not allowed.
Action: Update the LOB through the LOB buffers using the locator that has LOB buffering enabled. If this operation is required, buffers associated with this LOB should either be flushed as necessary or buffering should be disabled. Once this is done, reissue the command.
Cause: The operation attempted is not allowed when LOB buffering is enabled.
Action: If the operation is required, LOB buffering should not be used. In this case, flush buffers associated with the input LOB locator as necessary, disable buffering on the input LOB locator and reissue the command.
